Published at Monday, December 11th 2017. by Edith Jacobs in Home Design.
If you decide to use a universal home design to build your new home, you can expect your house to be worth more at the outset than another home of similar square footage and amenities, but that is not built from a universal design. The reason is that a universally designed house is more appealing to all segments of the population because of its practicality and usability for everyone. Universally designed homes are easier to sell and acrue in value more readily.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
Your abode is a reflection of your lifestyle and personality. Regardless of its size, it is your personal touch and indulgence in your home that makes it look unique and warm. For many, the very thought of home decoration leaves them into frenzy considering the huge expenses, however, if your home is designed using a well-sorted designing plan, you will surely achieve the right look at a much affordable price.
Because lot sizes vary from large to small, setbacks may be an issue. Another factor is whether or not the site is level or has a slope. Sloped sites are quite workable but present unique challenges that must be considered. Generally on sloped lots the hangars are placed on the lower section and the home on the higher section which allows the home and hangar to blend with one another nicely.
Important design elements
Overall, the report indicates a trend of stabilization in the design of kitchens and bathrooms with notable upticks in certain areas. Savvy renovation and remodeling contractors are cashing in on the number of households that renounced popular features during the downturn. Meanwhile, others expect more remodeling and addition options as the size of kitchen and bath design continues to increase in new home construction.